Corporate

Project:

Location:

Product:

Specifier:

Description:

Carlson Capital

Dallas, Texas

SEAMLESS STONE™ WALL FINISHES

Staffelbach Design Associates

“Establishing a warm sophisticated tone throughout all the common areas was a key design consideration in order to invite impromptu conversations and cultivate friendships among homeowners. Godfrey chose comforting hues of sea and sky and natural materials to immediately evoke familiarity and understated elegance.

We chose multiple custom finishes from Southwest Progressive Enterprises to compliment the design aesthetics we were trying to create. From pure limestone finishes to textured Venetian plaster finishes created specifically for this project, Southwest Progressive Enterprises’ high level of craftsmanship and the designs they created were critical in seamlessly meshing with the overall space and with JMC’s philosophy of crafting communities that endure and inspire.”

Project:

Location:

Product:

Specifier:

Description:

Carrell Clinic Center

Dallas, Texas

SEAMLESS STONE™ WALL FINISHES

GSR Andrade Architects

Completed in two phases the architectural/design firm chose a custom textured pattern with a contrasting smooth finish from our Seamless Stone® Wall Finish product line to accentuate the overall design aesthetics of this newly constructed healthcare facility.

Due to its superior ability to resist damage, the custom finishes were installed seamlessly in the high pedestrian traffic areas of the main lobby, elevator lobbies and other public areas including curved walls and others that exceeded a height of over 20 ft. tall.

Project:

Location:

Product:

Specifier:

Description:

Powell Goldstein

Atlanta, Georgia

SEAMLESS STONE™ WALL FINISHES

Smallwood, Reynolds, Stewart, Stewart Interiors

A Direct Quote from Design Director, Jack Pruitt:

“The client loves the finished look. They had asked us to give them a much warmer environment than their previous space and your product was very instrumental in achieving that. Thanks for providing such a great job for us.”

This custom handcrafted finish was installed at the main elevator lobby, conference center, main reception area and other public spaces.

Photos courtesy of Paul Warchol

Project:

Location:

Product:

Specifier:

Description:

Sally Beauty Company Corporate HDQ

Denton, Texas

PITTED PATTERN

Page Southerland Page – Dallas Office

The pitted pattern in a custom white color was installed in various public areas including the main elevator lobbies. The pitted pattern was chosen not only for it’s abuse resistance in high traffic areas, but also for the overall enhancement of adjacent finishes.

Project:

Location:

Product:

Specifier:

Description:

CNL II Office Tower

Orlando, Florida

SEAMLESS STONE™ WALL FINISHES  –  Custom Pitted and Custom Duturo Patterns

HKS Architects –  Dallas, Orlando

HKS Architects stated that they chose Seamless Stone Wall Finishes for several reasons, with the first being they wanted a unique look with a permanent feel.

Another factor in the selection was a finish that would endure the large volume of traffic that an office building is exposed to on a daily basis.

Aesthetically, Southwest Progressive Enterprises was able to use these custom finishes to create a stone panel effect for a fraction of the cost of real stone.

Project:

Location:

Product:

Specifier:

Description:

Dynetech Centre

Orlando Florida

SEAMLESS STONE™ WALL FINISHES

Baker Barrios Architects

A Direct Quote from Shanna Hanson, Project Designer/Associate, Baker Barrios Architects:

“Southwest Progressive Enterprises worked with Baker Barrios Architects to create a custom color and finish that worked perfectly with our design scheme. The pearlescent wall finish helped us to reflect light throughout the lobby, creating a brighter environment. The crisp, clean colors provide a modern look using traditional materials, perfect for downtown Orlando’s newest multi-occupancy high-rise.”

Southwest Progressive Enterprises installed over 10,000 sq/ft of Seamless Stone™ wall finishes in public areas, elevator lobbies and archways throughout the space at Dynetech Centre. The custom finishes installed at Dynetech were created specifically for Baker Barrios and were chosen for not only their aesthetic properties but also for their high abuse resistance.

Project:

Location:

Product:

Specifier:

Description:

Pilgrim’s Pride World Headquarters

Pittsburg, Texas

SEAMLESS STONE™ WALL FINISHES

Scott & Strong Architects & Interiors

A Direct Quote by the Designer, Tamesha Root :

“Our clients wanted their new corporate headquarters to be somewhat conservative-yet also illustrate their progressive approach within their industry. The building and interiors successfully combine these features. The age-old art of plastering has been somewhat modernized enabling designers to afford this beautiful craft in our modern-day projects. Hence, Seamless Stone Wall Finishes were the perfect choice for Pilgrim’s Pride: tradition on the progressive track.

We selected Seamless Stone Wall Finishes in the Spatulata finish for it’s amazing capability of mimicking polished stone. We were able to simulate polished stone columns at a fraction of the cost of actual stone, yet still maintain a hard and durable finish that will endure the test of time. The finished product is truly precisely what we were all looking for.

These custom handcrafted finishes were expertly installed on walls, ceilings and columns on five floors for lobby areas, corridors, executive offices and other public spaces including the main reception area.”

Project:

Location:

Product:

Description:

The Center for American & International Law

Plano, Texas

Armourcoat Pitted

The client was looking for a natural stone look without using actual stone panels and chose the pitted pattern as its made out of natural stone products and the final installation which included block joints achieved that look. Areas included the massive lobby areas and other public areas.

Project:

Location:

Product:

Description:

Zachry Construction

San Antonio, Texas

Armourcoat Smooth

Being one of the largest concrete applicators in the country they wanted a wall finish that would duplicate the appearance of smooth concrete in a custom color to achieve that look. The lobby and corridors were installed seamlessly.

Project:

Location:

Product:

Description:

Sterling Commerce

Las Colinas, Texas

Armourcoat Dragged

A custom textured custom colored Dragged pattern was installed in the main lobby and corridors and other public areas.

Project:

Location:

Product:

Description:

Crossmark Global Headquarters

Plano, Texas

Armourcoat Smooth

Various products were used in high traffic areas including public areas, corridors and the main employee lobby.

Project:

Location:

Product:

Description:

Time Warner Telecom

Denver, Colorado

Armourcoat Pitted

The Pitted finish with a color wash for a more dramatic appearance was installed in numerous lobbies and corridors.

Project:

Location:

Product:

Description:

Las Colinas Towers

Las Colinas, Texas

Seamless Limestone

This renovation project was done to completely redo and upgrade the main lobby area and chose Seamless Limestone. An authentic limestone product to complete the overall look.

Project:

Location:

Product:

Description:

Verio Call Center

Dallas, Texas

Armourcoat Smooth and Travertine

The banding effect was created using two very distinct textures Travertine and Smooth. For a more dramatic statement the company’s logo was embedded into both finishes.

Project:

Location:

Product:

Description:

i2 Technologies

Austin & Dallas, Texas

Armourcoat Travertine

A Travertine pattern with a blockwork effect to duplicate the look of natural stone was used for numerous lobbies on different floors for both locations. A custom color was chosen to match the company’s corporate colors.

Project:

Location:

Product:

Description:

Fibich & Hampton

Houston, Texas

Armourcoat Smooth

A custom blockwork pattern was created with the Smooth texture as the focal wall for this Houston Law Firm.

Project:

Location:

Product:

Specifier:

Description:

Florida Hospital

Orlando, Florida

SEAMLESS STONE™ WALL FINISHES

Hunton Brady Architects

A Direct Quote from Anya Tibbets, Project Designer, Hunton Brady Architects

“Southwest Progressive Enterprises was very efficient at providing us with many custom color options to work within the established design palette for the Florida Hospital Ginsburg Tower Project.”

Over 40,000 Sqft of Stone Plaster™ was installed in various custom patterns and colors. Stone Plaster™ was chosen for its resistant to abuse caused by wheelchairs, gurneys and other movable equipment while still working within the design aesthetics that were set forth. Stone Plaster™ was also selected based on its unparalleled 10 year warranty against mold and mildew along with its exceptional ease of cleaning. These custom finishes were installed in the reception areas, corridors, elevator lobbies, chapels, patient floors and public spaces and has also been specified and installed at several other hospitals within the Florida Hospital system.

Project:

Location:

Product:

Specifier:

Description:

Scott Douglas McConnico Law FIrm

Austin, Texas

MAGNASTONE, ARMOURCOAT TRIARCH

Lauck Group Austin

Direct quote from Rebecca Glass with Lauck Group

“A striking first impression is made with the two-story custom truquoise-blue plaster herringbone feature wall and carved, wood monumental staricase.  We worked closely with Southwest Progressive on the various textures and custom color for the finish. The chevron shaped millwork panels were shipped from Austin to Southwest Progressive in Dallas for the applicaiton of the custom blue finishes. The panels were beautifully crafted by their artisans with superb detail, executing the designs for a bright, vibrant, bold installation with excellence.”

Project:

Location:

Specifier:

Description:

Orion Corporate Center

Naples, FLorida

Hegman Design Group

Armourcoats Travertine and Smooth were installed in a banding pattern to compliment adjacent finishes in a stone finish.